Airlink101 APO1000 - Manual (Page 6)

5
APO1000/APO1010 supports web-based configuration. Upon the completion of hardware installation, APO1000/APO1010
can be configured through a PC or Laptop by using its web browser such as Internet Explorer or Mozilla Firefox.
¾ Default IP Address : 192.168.2.254
¾ Default IP Netmask : 255.255.255.0
¾ Default User Name and Password :
The default user name and password for both root manager account and admin manager account are as follows :
Mode CPE Mode AP Mode WDS Mode
Client Bridge +
Universal Repeater Mode
Management Account
Root
Account Admin
Account Root
Account Root
Account Root
Account
User Name root admin root root root
Password default admin default default default
Step
„ IP Segment Set-up for Administrator's PC
Set the IP segment of the administrator's computer to be in the same range as APO1000/APO1010 for accessing the
system. Do not duplicate the IP Address used here with IP Address of APO1000/APO1010 or any other device within the
network
Example of Segment :
The valid range is 1 ~ 254 and 192.168.2.254 shall be avoided because it is already assigned to APO1000/APO1010.
192.168.2.10 is used in the example below.
¾ IP Address : 192.168.2.10
¾ IP Netmask : 255.255.255.0
„ Launch Web Browser
Launch web browser to access the web management interface of system by entering the default IP Address,
http://192.168.2.254 , in the URL field, and then press Enter.
Getting Started