Airlink101 APO1000 - Manual (Page 2)

1
Preface
The 802.11 b/g compliant Airlink101® APO1000/APO1010 is an outdoor high power wireless access point that can be used
for five different purposes in three different modes. In the AP mode, it can be deployed either as traditional fixed wireless
Access Point (AP), or combination of AP and WDS (AP+WDS). In the WDS mode, it’s only used to expand or bridge Ethernet
networks and deployed as a main base, relay based or remote base station. In the CPE (Customer Premises Equipment)
mode, it connects to Wireless Internet Service Provider’s (WISP) outdoor network via wireless WAN gateway to access to
Internet. In the Client Bridge + Universal Repeater mode, it connects to Wireless Internet Service Provider’s (WISP) outdoor
network via wireless or wired bridge to access to Internet
The die-cast sealed APO1000/APO1010is compact in size and compliant with IP68 weatherproof standard. It comes with a
mounting kit to mount on pole or wall. It is suitable for both indoor and outdoor usage with its 500mW output power, which is
higher than a typical indoor AP (100mW).
This Quick Installation Guide provides instructions and reference material for getting started with APO1000/APO1010. This
guide will also show you how to connect APO1000/APO1010 to other network devices.
Package Contents
The standard package contents of APO1000/APO1010 :
„ APO1000/APO1010 x 1
„ Quick Installation Guide x 1
„ CD-ROM (with User Manual and QIG) x 1
„ PoE Adapter (PSE) with AC Cable x 1
„ Mounting Kit x 1
It is highly recommended to use all the supplies in the package instead of substituting any components by other
suppliers to guarantee best performance.