Cycle stall basic, American bicycle security company – American Bicycle Security Company Cycle Stall Basic User Manual
Page 2

American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
Cycle Stall Basic
Product
Cycle Stall Basic
Capacity
Single: 10 Bikes
Double: 22 Bikes
Materials
Hoop Racks: 1.5” schedule 40 pipe (1.9” OD)
Wheel Stops: Recycled plastic
Finishes
An after fabrication hot dipped galvanized finish is our standard
option.
250 TGIC powder coat colors, thermoplastic coating, PVC dip,
and stainless steel finishes are also available as alternate
options.
Our powder coat finish assures a high level of adhesion
and durability by following these steps:
1. Sandblast
2. Epoxy primer electrostatically applied
3. Final thick TGIC polyester powder coat
Stainless Steel: 304 grade stainless steel material finished
in either a high polished shine or a satin finish.
Installation
Methods
Rail mount - Hoop Racks are mounted to galvanized rails
which should be anchored to the ground.
Space Use
& Setbacks
Curb Setbacks:
Minimum: 44”
Traffic Lane Setbacks:
Minimum: 44”
Wheel Stop Setbacks:
Allow minimum of 36” between wheel stops and racks.