Bike haven – American Bicycle Security Company Bike Haven User Manual
Page 6
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
Bike Haven
Installation Instructions
8. Drill a ¼” hole in the ground at the
slotted hole in the REAR PANNEL foot
and secure with a ¼” wedge anchor.
9. Place the SIDE PANEL in place and
clamp it to the UPRIGHTS. Using the
four ½” holes in the SIDE PANEL as a
guide, drill through both walls of the
UPRIGHTS with a 3/8” drill bit. Bolt the
SIDE PANEL to the UPRIGHTS with the
aluminum spacers in between the SIDE
PANEL and UPRIGHTS. Repeat for the
other SIDE PANEL.
Installing Add On units to an Existing Shelter:
1. Remove the SIDE PANEL from the side of the shelter the addition
will be added, if applicable. The SIDE PANEL will then be reinstalled
on the last addition. Remove one ROOF PANEL adjacent
to the side of the shelter the addition will be added .
Refer to “Bike Haven Installation Instructions” to complete the
addition.