American Bicycle Security Company Bike Haven - Manual (Page 2)

American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
www.ameribike.com
Email: [email protected]
Bike Haven
Product Bike Haven
Capacity See diagrams below and to left
Materials Uprights: 4” x 3/16” square tube.
Feet: 3/8” plate
Roof Member: 4” x 3/16” square tube
Roof Member Long: 2” x 4” x 1/8” tube
Roof Panels: Type S deck 26g galvanized steel
Panels: ¼” clear polycarbonate with 1.77” square aluminum
framing
Finishes An after fabrication hot dipped galvanized finish is our standard
option.
250 TGIC powder coat colors, thermoplastic coating, PVC dip,
and stainless steel finishes are also available as alternate
options.
Our powder coat finish assures a high level of adhesion
and durability by following these steps:
1. Sandblast
2. Epoxy primer electrostatically applied
3. Final thick TGIC polyester powder coat
Installation
Methods
Surface Mount has 10” square feet which must be
anchored to the ground with supplied anchors.
Space Use
& Setbacks
Consult local building codes for acceptable setbacks and
placement.
Load Data Dead load = self weight of structure
Live load = 40 psf
Wind load = 90 mph exposure B
Seismic load = moderate
Footing: see page 4
Anchors: ½” diameter x 4.25” Simpson Strong-bolt 2
*These can also be modular.