Avaya 9101 User Manual

Page 11

The TOP VIEW includes the following:.

1) LINE jack (on top side of telephone)

This jack, located on the top/rear of the set, is used to connect the
telephone and the modular wall jack. Use the 7-foot cord that comes
with the set.

2) Ringer indicator/Message light

This indicator flashes when the telephone rings with an incoming call.
The light also flashes when you have a message.

3) Dial pad

The standard dial pad can be used for normal dialing.

4) FLASH button

This button is used with PBX systems to activate special PBX facilities
such as Hold or Transfer which may be available in your PBX.

Note: If you press the switchhook on your telephone rather than the
Flash button, the line and the call will be released automatically. After
a minimum of two seconds, you will hear dial tone and you may begin
dialing.

5) Handset cord jack

This jack, located on the left side of the set, is used for connecting the
handset with the telephone.

6) Handset

The handset is used for placing and receiving calls.