TurboChef Technologies Fire Oven - Manual (Page 16)

8 OVEN OPERATION
Setting the Parameters
Access the parameter settings to change oven options. For a full list of parameters, descriptions, and
values, see page 9.
To set the parameters:
1. While the oven is off, simultaneously press and hold the Time Preset 2 and 3 keys for two seconds. The
Upper Temperature display will read “PA”.
2. Press the Down key until the Time display reads “-19”.
3. Simultaneously press and hold the Time Preset 2 and 3 keys for two seconds. The Upper Temperature
display will now read “P0”.
4. Refer to the table on page 9 and use the Time Preset 2 and 3 keys (increase and decrease parameter
numbers) to navigate through the parameters.
5. Use the Up and Down keys to change the values.
6. When finished, press the On/Off key.