RIDGID 101 Tubing Cutter - Manual (Page 3)

Ridge Tool Company/Elyria, Ohio, U.S.A.
34
Tubing & Plastic Pipe Cutters
Ref. 151 152 153 154 156
No. Description 1 /
4 ″-1 5 /
8 ″ O.D. 1 /
4 ″-2 5 /
8 ″ O.D. 1 1 /
4 ″-3 1 /
2 ″ O.D. 1 7 /
8 ″-4 1 /
4 ″ O.D. 4″-6 5 /
8 ″ O.D.
1 Roller (Large) 32097 (2) 34670 (2) 34670 (2) 32102 (2) 32102 (2)
2 Roller Pin 32107 (2) 32112 (4) 32112 (4) 32117 (2) 32117 (2)
3 Frame 32017 32022 32962 32027 32032
4 Stop Pin 33122 32152 32152 32157 32157
5 Latch 51307 51312 51312 51312 51312
6 Latch Spring 34190 34190 34190 34190 34190
7 Latch Pin 41545 78425 78425 51302 51302
8 Cutter Wheel 33185 33185 33185 33170 33170
9 Wheel Pin & Clip 32142 32142 32142 32147 32147
— Quick Change Pin 21533 21533 21533 22643 22643
10 Clip 74740 74740 74740 34175 34175
11 Slide 32037 32042 32042 32047 32047
12 Slide Spring 32087 32092 32092 32092 32092
13 Bearing 41577 32082 32082 32082 32082
14 Retaining Ring 32162 32167 32167 32167 32167
15* Feed Screw Assembly 41847 32057 32057 22383 22383
(Incl. Ref. #14)
16 Roller Small — 34665 (2) — — —
17 Reamer Blade Kit 32172 32172 — — —
18 Reversible Knob 33177 33182 33182 33182 33182
(Incl. Ref. #19)
19 Washer Screw 34750 34750 34750 34750 34750
20 Thrust Washer — — — 47137 47137
151-P 152-P 153-P 154-P 156-P
Description 1 /
4 ″-1″ Nom. 1 /
4 ″-2″ Nom. 1 1 /
4 ″-3 1 /
2 ″ Nom. 1 7 /
8 ″-4″ Nom. 4″-6″ Nom.
8 Cutter Wheel 74720 74720 74720 74730 74735
NOTE: 1. All parts for the P-Series are the same as the Quick-Acting except for those parts listed.
2. 151-P and 152-P can cut thin wall PVC and flexible plastic when using the 33200 Cutter Wheel.
* 151 Feed Screw also includes Ref. 13 Bearing.
NOTE: Order parts by Catalog Number only.
DO NOT order by Reference Number.
Tubing: Nos. 151, 152, 153, 154 and 156
Plastic Tubing and Plastic Pipe: Nos. 151-P, 152-P, 153-P, 154-P and 156-P
Capacity: 1 /
4
″ through 6 5 /
8
″ O.D.
1
3
4
2
5
6
17
151 & 152
Series Only
15*
19
18
7
8
10
13
11 14
20
12
9
KNOB ENDVIEWS
151, 152 and 153 Series Only
Note: 151, 151-P, 152 152-P 153, 153-P
have a reversible knob. Knob is
designed to stop cutter wheel short of
the rolls. Orient “PE PVC” out for
plastic and “CU” out for copper.
16
152-PVC
Description 1 /
4
″-2″ Nom.
8 Cutter Wheel — 33195 — — —