Cross rods, Tools instructions, Lower burners – Nieco N2500 User Manual
Page 24

24
Nieco Corporation - Model N2500
Wipe inside cross rods clean.
Cross Rods
Inside
Tools
Instructions
Clean: Weekly
1.
Towel
Open the side access door.
Slide burner out.
Brush with a dry brush.
If necessary, use the small orifice brush to clean
any clogged burner holes.
Repeat steps for all burners.
DO NOT use water or get the burners wet.
REASSEMBLY: Be sure the holes on the burner are
facing up.
Lower Burners
Side
Tools
Instructions
Clean: Monthly
Soft Bristle Brush
No water
Heat Resistant Gloves
1.
2.
3.
4.
!
Small Orifice Brush
5.
1
2
3