Napoleon Fireplaces Torch - GVFT8 - Manual (Page 16)

16
W415-0847 / C / 04.11.12
1/4”
( APPROX.)
CONTROL
DOOR
1/4”
( APPROX.)
LOGO
With the control door closed, affi x the logo to the front face of the
control door at the bottom left corner.
5.4 LOGO PLACEMENT
MEDIA
TRAY
GLASS
MEDIA
BURNER
5.5 GLASS MEDIA INSTALLATION
74.2A
Evenly spread the glass media onto the media tray, ensuring no glass media falls into the pilot opening. If this
happens, insert a clean bag into your vacuum cleaner and vacuum out the glass media. Replacement glass
can be purchased from your local authorized dealer / distributor.
CLEANING GLASS MEDIA
Glass media may have a fi ne oil residue that needs to be cleaned prior to installation. Clean the glass with mild
dish soap, drain, rinse thoroughly and dry before placing around the burner.
CLEAN THE GLASS MEDIA PRIOR TO INSTALLATION. BEFORE APPLYING THE CLEANED GLASS, ENSURE
THAT IT IS DRY.
DO NOT CHANGE OR SUBSTITUTE THE GLASS MEDIA MATERIAL PROVIDED WITH THIS APPLIANCE. IF
REPLACING, USE ONLY THE REPLACEMENT GLASS MEDIA AVAILABLE FROM YOUR AUTHORIZED
DEALER / DISTRIBUTOR.
!
WARNING