Merrychef eikon e6 User Manual
Page 4
![background image](/manuals/458888/4/background.png)
20000403 – A – E6 Oven Operator Manual
4
To avoid risk of electric shock or death, this oven must be grounded and plug must
not be altered.
!
WARNING:
OVEN PLACEMENT / INSTALLATION
INSPECT OVEN
• Inspect oven for damage such as dents in door or inside oven cavity.
• Report any dents or breakage to source of purchase immediately. Do not attempt to use oven if damaged.
• Remove all packing materials from oven interior.
(Note: Check all packing material as accessories may be stored in oven interior.)
• If oven has been stored in extremely cold area, wait a few hours before connecting power.
PLACING THE OVEN
• Lift the oven onto a cart. As the oven weighs 210 lbs, a two person lift is required.
• Install the oven accessories as shown below.
• Position the oven with a minimum 2” (two inches) clearance on top and both sides of oven for cabinet venting.
• Outlet should be located so that plug is accessible when oven is in place.
• Required clearances must be maintained from all walls and combustible materials.
• The oven must be mounted on factory installed legs for proper air ventilation.
• Plug oven into proper power source.
NOTE:
• This oven is suitable for either 208VAC or 240VAC and will automatically adjust to suit voltage being supplied.
Upon receipt of this unit, immediately unpack and inspect for possible concealed shipping damage. If unit is found to
be damaged, save all packing materials and contact your delivery carrier immediately. Failure to follow these
instructions will negate Merrychef USA’s or your ability to file claims and receive compensation for shipping damage.
IF THERE IS APPARENT DAMAGE: United States and Canada: Arrangements should be made to file a claim
against the carrier. As Interstate Commerce Regulations require that the claim must be initiated by the consignee.
All shipments to other countries: Freight terms will be developed and extended on an individual basis.
Proper and secure storage facilities should be arranged for the oven(s), if necessary, to protect from outdoor or
damp conditions at all times before installation.
NOTE:
Air Filters
Place cook plate on its supports
inside the oven.
Ensure air filters are in place
and properly fitted before
locating the oven.
Cook Plate
Supports