HOUNO C-gas - Manual (Page 14)

C-gas – ver. 3.x – August 2009
14
Then activate the semiautomatic cleaning program by pressing START
(no wash arm required) and follow the instructions in the display.
16 Cook & Regen Setting of humidity pulsing. Press temperature key and turn switch to
change setting. The value indicates the number of seconds between each
injection into the oven chamber. If the value is increased, less humidity
is added to the oven chamber, if the value is reduced, more humidity is
added (factory setting is every 8 seconds).
17 Injection
interval 1
Combi steaming 1: See 16 (factory setting is every 12 seconds)
18 Injection
interval 2
Combi steaming 2: See 16 (factory setting is every 5 seconds)
19 Save all Press ALARM to make a backup of all settings in all modes and
programmes.
20 Retrieve all Press ALARM to retrieve all settings saved in all modes and programmes.
21 Retrieve ori-
ginal menu
Press ALARM and retrieve all programmes preset by the manufacturer. In
step display, choose which program (0 – 4) to retrieve and press ALARM.
22 Screen saver Interval of seconds before screen saver becomes active. 0 = 0 sec. / 1 =
10 sec. / 2 = 30 sec. / 3 = 60 sec./ 4 = 180 sec. / 5 = 600 sec. Change
by pressing STEP.
23 Language Change by pressing STEP (1 – 4).
24 SW update Updating of software. Special memory key required. Contact your local
distributor.