HOUNO CPE-gas - Manual (Page 9)

CPE/KPE – Ver. 1.54x – July 2009
9
Core temperature sensor
The graph illustrates the difference between oven temperature and core temperature. The
graph is fixed and does not change when you set the core temperature. Core temperature
probe 1 is blue and core temperature probe 2 (optional extra) is green. The red line is the
oven temperature.
Cooking with core temperature probe 2
The temperature in the product determines which of the two probes first reaches the desired
core temperature. When one of the probes reaches the core temperature, an alarm sounds and
a message in yellow appears in the display. Take out the product. Close the door and the oven
continues until the second probe reaches the desired core
temperature.
Return without saving
OK for settings and
return
ON/OFF core
temperature probe 1
ON/OFF core
temperature probe 2
(optional extra)
Return without saving
OK for settings and
return
Activate core
temperature probe 2
(optional extra) Setting of core
temperature
30 – 150°C