Control panel – EXONIC EXD 7082 User Manual
Page 17

Control Panel
-16-
10
(EJECT) BUTTON
Press it button to eject the DISC or insert the DISC to start play .
4
SEL BUTTON
Briefly p
switch between BASS,TRE,BAL, FADE,
COLOR,BRIGHT,CONTR, TINT and VOL; Long press this button to switch LOUD,
then briefly press this button repeatedly to switch between SWF,EQ,DX/LOCAL
(in radio mode),STEREO/MONO(in radio mode),TIME 24H/12H,SET CLOCK,
BUZZ,EUR/USA FREQ,ANIMA and BG; After switching a desired item above,
press VOL+ or VOL- button to set.
ress this button repeatedly to
11 RESET BUTTON
Press this button to return to factory settings .
-Store in Memory
>
-Retrieve a preset station
Select the frequency band
> Press repeatedly the button to select the desired memory key .
> Select the station
> Keep the desired memory key pressed in until the station is heard again
after a brief interruption .
The operation as below:
press the button repeatedly to retrieve a station which had been stored in the
memory in advance the chose number is shown on display .
6
IR SENSOR
5/7 VOL-/VOL+ BUTTON
In normal mode, this button is used to increase or decrease the volume. It is also
used as an UP/DOWN button when audio or video settings are being adjusted
when accessed using the SELECT button.
8
MU (MUTE)
In any mode, press it button to mute the sound .
9
ANGLE (Screen position)
Press this button repeatedly to cycle through the different positions.
12 AUX Input JACK
For information about connecting a AUX device, please see page 29 .