EXONIC EXD 6805 - Manual (Page 16)

-15-
Basic Operation
NOTE:
If RESET is selected, all memory data
will deleted, please re-adjust .
Reset Factory Settings
RESET button is placed on the housing
and must be activated with either a
ballpoint pen or thin metal object.
The RESET button is to be activated for
the following reasons:
A. Initial installation of the unit when
all wiring is completed.
B. All the function buttons do not operate.
C. Error symbol on the display.
RE T
RESET
Hour adjustment: 0-23
ADJUSTABLE ITEMS:
Minutes adjustment: 0-59
Time format selectment : 12H/24H
touch the “ / ” ranges to select the
adjustment item, touch the “ / ”
ranges to adjust the selectment item ,
then touch
“ SET ” icon to confirm .
It`s depend on your need to setup the
data .
Hea ph nes p rt d o o
A X N U I
EXTERNAL AUDIO SOURCE
On the front panel of the unit , there is an
AUX IN jack, to connect analogue replay
devices. Use this jack to replay sound of
other replay equipment such as
MP3 players, etc. Via the loudspeakers.
1). Please f
connect the external device with a
3.5 mm stereo jack plug to the AUX IN
socket .
2). Press the MOD button to select the
AUX IN connection.
3). You now hear the sound from the
external device played back throuch
the loudspeakers .
3). For the remaining procedure please
see the operating instructions of the
external sound source .
ollowing the diagram below,