Dynatek 2002-2005 Harley Davidson V-Rod Models - Manual (Page 4)

Unplug the Throttle Position Sensor(TPS)
connector from the throttle body on the front
cylinder. If there is a black wire loom over the
3 wires to the TPS, remove this loom.
Locate the red wire tap supplied in the kit.
Crimp the wire tap onto the grey wire with the
purple stripe on the TPS connector. It is at
position "C" on the TPS connector. Plug the
TPS connector back into the throttle body.
Plug the grey wire from the FIC harness into
the wire tap on the TPS connector.
Reinstall airbox and breather hose. Reinstall
airbox lid. Reconnect temp sensor at front of
airbox. Reinstall airbox cover, and seat.
STEP
7
STEP
8
STEP 7
STEP 9
STEP 8
Installation
Part# DFCH-5 4