ARCHOS box rock - Manual (Page 23)

2 RECORDING (RECORDERS ONLY)
2.1 WHILE RECORDING SCREEN
Recording Screen Recording F2 screen Recording F3 screen
Entering the “Recording” option in the Main menu launches the recording application.
The screen shows the time elapsed and the size of the file being recorded. A peak
meter is present to allow you set Gain correctly. Frequency, channels and quality are
shown on the last line.
The controls for this screen are:
BUTTON FUNCTION
LEFT Decreases Gain
RIGHT Increases Gain
PLAY
Starts recording. While recording, button closes the current file and opens
a new one
STOP Exits Recording Screen. If Recording a file, stop recording
F1 Opens Recording Settings screen (see below)
F2
Quick menu for recording settings. A quick press will leave the screen up
(press F2 again to exit), while holding it will close the screen when you
release it.
F3 Quick menu for source setting. Quick/hold works as for F2.
2.2 RECORDING SETTINGS
Quality
Choose the quality here (0 to 7). Default is 5, best quality is 7, smallest file size is
0. This setting effects how much your sound sample will be compressed. Higher
quality settings result in higher bit rate MP3 files.
Frequency
Choose the recording frequency (sample rate). 48kHz, 44.1kHz, 32kHz, 24kHz,
22.05kHz, 16kHz are available. Higher sample rates use up more disk space, but
give better sound quality.
Rockbox User Manual