Balboa Water Group MoodEFX LED String Lights - Manual (Page 3)

DESCRIPTION OF SHOWS
1. SLOW COLOR WASH*
Colors transition gracefully from
color to color, cycling through the
color spectrum. Each color cycle
takes approximately 3 minutes.
2. FAST COLOR WASH*
Colors transition from color to
color, cycling through the color
spectrum. Each color cycle takes
approximately 1 minute.
3. SLOW RANDOM COLOR*
Colors step or jump from one
color to the next in random order.
Each color lasts approximately
10–15 seconds.
4. FAST RANDOM COLOR
Colors step or jump from one
color to the next in random order.
Each color lasts approximately
5 seconds.
5. HIGH SPEED RANDOM
COLOR
A rapid series of intense flashes of
varying colored light.
6. CROSS FADE*
Colors cycle back and forth
gracefully between blue and
green. Total cycle lasts 1 minute.
7–13. FIXED COLORS
Static display of a single color.
Available colors include white,
pink, lavender, light blue, dark
blue, light green, and dark green.
* These effects begin at a slightly
faster speed, then slow down after
one or two seconds. This is to help
you identify the effect.
Installing the
MoodEFX LED
The MoodEFX LED String Light
System fits the 12VAC lighting
sockets. It is not for use with spas
that have dimming systems or
electronic transformers.
1. Decide the placement of the LED
within the spa.
2. Mark and drill a 1/2” hole.
3. Install and secure.
4. Plug the four connector wires
together including the controller
box within the loop or string
of LED’s.
5. Plug the two (black & white wire)
terminal into your 12VAC source.
6. Turn the power on to verify that
the LEDs are all lit.
Use the spa’s existing light switch to
turn MoodEFX on and off.
MoodEFX lights are preprogrammed
with an assortment of unique
light shows.
• Turn MoodEFX OFF and then ON
again in 1 second or less, to go to
the next show.
• Turn MoodEFX OFF and then ON
again in 4 to 5 seconds to reset to
the first show.
• Turn MoodEFX OFF for more than
6 seconds and it “remembers” the
last show you selected, returning to
that show the next time MoodEFX is
switched on.