Balboa Water Group 59200 Chromatherapy Front Access Light - Manual (Page 2)

RELAMP INSTRUCTIONS (cont.)
œœÜÊÌ iʈ˜ÃÌÀÕV̈œ˜ГКœ˜КМ iК 7Кi˜Ãʈ˜ÃiÀÌÊ̜œК«АœЫˆ`i`°Ê
1. Remove lens insert with tool.
2. Pull bulb straight out.
3. Gently push in new bulb.
{°Ê6iÀˆvÞÊÌ iКœ‡Аˆ˜}КˆГʘœМК`>“>}i`Ê>˜`КˆГК«Аœ«iАЮКˆ˜К«>Vi°Кœ˜М>VÌÊ>ʵÕ>ˆwi`ÊÃiÀۈViК«АœviÃȜ˜>ÊˆvÊ>Ê
replacement o-ring is needed.
5. Replace lens insert with tool.
6. Tighten.
US Operations
1382 Bell Avenue, Tustin, California 92780
Main Number 1-714-384-0384 | Fax Number 1-714-384-0385 | Inside Sales 1-714-384-0384 | Tech Support 1-714-384-0384
www.balboawatergroup.com
email: [email protected]
© 2009 - 2013 Balboa Water Group Inc. All rights reserved. Your Single Source Solution.
Disclaimer: Every endeavour has been made to publish the correct details in this data sheet.
No responsibility will be taken for errors, omissions or changes in product specifications.
Balboa Water Group reserves the right to change specifications.
4. Replace lens insert
with tool. Tighten to
align tool with notch.
1. Remove lens
with insert tool. 2. Remove lens. Pull
bulb straight Out.
Verify the o-ring is
not damaged and is
properly in place.
3. Gently push
in new bulb.