Alpine cda-9886 - Manual (Page 11)

9
-EN
01GB05CDA9886.fm
ALPINE CDA-9886 68-09359Z43-A (EN)
4
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
5
To pause playback, press / .
Pressing / again will resume playback.
6
After pressing (OPEN) to open the front panel,
press to eject the disc.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold for at least 2 seconds.
• The CD-player can play discs containing audio data, MP3 data,
WMA data and AAC data.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from the
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
• The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
MP3/WMA/AAC Play Display
The folder number and file number will be displayed as
described below.
• Press VIEW to switch the display. See “Displaying the Text”
(page 15) for information about display switching.
Repeat Play
Press 4 to play back repeatedly the track being played.
The track (file) will be played repeatedly.
Press 4 again and select off to deactivate repeat play.
CD mode :
* 1 When a CD changer is connected.
• If RPT is set to ON during M.I.X. play in CD changer mode, M.I.X.
will apply to the current disc only.
MP3/WMA/AAC mode :
* 2 When an MP3 compatible CD changer is connected.
• If a CD changer or an MP3 compatible CD changer is connected:
After pressing F/SETUP to select the function mode (RPT/M.I.X.),
perform the operation within 5 seconds.
M.I.X. (Random Play)
Press 5 in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5 again.
Internal CD mode :
Volume level
Folder number
display
Elapsed time
File number display
< Repeat One >
< Repeat All >
: Only a track is repeatedly played back.
: A disc is repeatedly played back.
< Repeat Folder >
<
Repeat One >
< Repeat All >
: Only a file is repeatedly played back.
: Only files in a folder are repeatedly
played back.
: A disc is repeatedly played back.
< M.I.X. One >
: The tracks are played back in random
sequence.
01GB00CDA9886.book Page 9 Friday, September 28, 2007 10:20 AM