JVC KV-MRD900 - Manual (Page 33)

33
ENGLISH
More about this monitor
Basic operations
Turning off the power
• If you turn off the power while listening to a
disc, disc play will start automatically, next
time you turn on the power.
Disc operations
General
• In this manual, words “track” and “file” are
interchangeably used when referring to MP3/
WMA/JPEG files and their file names.
• This unit can also playback 8 cm discs.
• This unit can only playback audio CD (CD-
DA) files if different type of files are recorded
in the same disc.
– The first track will be skipped if a different
type of file is detected first.
• When a disc has been loaded, selecting
“DISC” for the playback source starts disc
play.
Starting playback
• When a disc is inserted upside down, “NO
DISC” appears on the screen, then the disc
will automatically eject.
• You can play a disc even if the monitor is
closed.
Basic operations
• No sound comes out during slow motion
playback. When playing a VCD, reverse slow
motion playback is prohibited.
• One Touch Replay works only within the
same title. (For some DVDs, this function
does not work.)
• When playing a DVD/VCD, no sound comes
out during Search.
• Reverse search stops automatically when it
reaches the beginning of the disc. Playback
resumes at normal speed.
DVD/VCD/JPEG special functions
• For some DVDs and VCDs, changing the
subtitle language, audio language (or audio
channel) without using the disc menu is
prohibited.
• While zoomed in, the picture may look
coarse.
Playing a DVD-R/DVD-RW or CD-R/CD-
RW
• Use only “finalized” discs.
• This unit can play back only the files of the
same type which is first detected if a disc
includes both audio CD (CD-DA) files and
MP3/WMA/JPEG files.
• This unit can play back either MP3/WMA
files or JPEG files if a disc includes both kind
of files. Set the playback file type on DVD
setup menu (page 29) before playing back a
disc containing both kind of files.
• Only for CD-R/CD-RW: This unit can play
back multi-session discs; however, unclosed
sessions will be skipped while playing.
• Some DVD-R/DVD-RW or CD-R/CD-
RW may not play back on this unit because
of their disc characteristics, and for the
following causes:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens
inside the unit.
– The pickup lens inside the unit is dirty.
– CD-R/CD-RW on which the files are
written with “Packet Write” method.
– DVD-R/DVD-RW which are not written
in UDF-Bridge Format (eg. UDF format or
ISO format).
– There are improper recording conditions
(missing data, etc.) or media conditions
(stain, scratch, warp, etc.).
• DVD-RW/CD-RW may require a longer
readout time since the reflectance of DVD-
RW/CD-RW is lower than that of regular
discs.
To be continued....
EN31-39_KV-MRD900[E]f.indd 33 EN31-39_KV-MRD900[E]f.indd 33 05.3.19 0:26:35 PM 05.3.19 0:26:35 PM