Apple ATI RADEON CABLE HD 4870 - Manual (Page 4)

073-1250 Rev. A 4 © 2009 Apple Inc. All rights reserved.
8
Disconnect cable
from card.
Installing the
Replacement Cable
and the Card
Connect replacement
1
cable to card.
2
Re-install card in slot.
Note: You can install
card in PCI slot 1, 2, or
3. Installed in slot 2, it
blocks slot 3. Installed
in slot 3, it blocks slot
4. Because of card’s
height, do not install
it in slot 4.
Note: Make sure
end of card goes
into correct card
guide. Then align
card’s connector
with expansion slot
and press down until
connector is inserted
all the way into slot.
3
Connect card’s cables
to connectors on
backplane board.