Alliance Laundry Systems F232139R3 User Manual

Page 12

Programming

F232139

3. Use Up or Down (arrow) key to select fill

temperature: cold (CFIL), hot (HFIL) or
warm (bFIL). Press Start (#) key.

4. Use Up or Down (arrow) key to select fill level:

low level (LOLE) or high level (HILE). Press
Start (#) key.

5. Use Up or Down (arrow) key to select supply

option. Refer to Table 3. Press Start (#) key.

The Supply Dispenser Compartment functions as
follows: Supply compartment 1 flushes with each fill.
Supply compartment 2 flushes when the program calls
for supply 2 during a fill. Supply compartment 3
flushes when the program calls for supply 3 during a
fill.

The Chemical Injection Supply Nozzles located in
their respective supply compartments function as
follows: Chemical supply nozzle 1 empties into
compartment 1, chemical supply nozzle 2 and 4 empty
into compartment 2, and chemical supply nozzle 3
empties into compartment 3. Refer to Figure 2.

Figure 2

NOTE: Compartment 2 does not flush when supply
4 is called for in a program.

6. If machine is equipped with auxiliary heating

system, use Up or Down (arrow) key to select
desired segment temperature. Set value to zero to
disable auxiliary heat for this segment. Press
Start (#) key.

NOTE: Do not program heat steps for machines
not equipped with auxiliary heat. The machine will
pause for 30 minutes during any step in which the
fill water temperature does not already equal or
exceed the programmed value of the heat step.

7. Use Up or Down (arrow) key to select spin time.

Set value to zero to skip spin step. Press Start (#)
key. Display will now show the identifier for next
program segment.

8. Press the Stop (#) key to complete cycle

programming procedure.

Refer to the Cycle Charts section for detailed
description of cycles.

Supply Options

Display

Supply

SUP0

No Supply

SUP1

Supply 1

SUP2

Supply 2

SUP3

Supply 3

SUP4

Supply 4

SUP5

Supply 1 and 2

SUP6

Supply 2 and 3

SUP7

Supply 3 and 4

Table 3

B009RE3A

Supply Dispenser Compartments

Detergent

Bleach

Softner

Chemical Injection Supply Nozzles

Detergent

2/4

Bleach

Softner

Supply Dispenser

Compartments

Chemical Injection

Supply Nozzles

4 3

B009RE3A