Panasonic SC-NE3 - Manual (Page 12)

12
VQT4U49
Bluetooth
®
operations
By using the Bluetooth ® connection, you can listen to the sound from the Bluetooth ® audio device from this
unit wirelessly.
≥ Refer to the operating instructions of the Bluetooth
® device for details.
Preparation
≥ Turn on the Bluetooth
® feature of the device and
place the device near this unit.
≥ If this unit is already connected to a Bluetooth ®
device, disconnect it.
1
Press [ , AUX] to select “BLUETOOTH”.
≥ If “PAIRING” is indicated on the display, go to step 3.
2
Press [PLAY MENU] to select “NEW DEV.” and
then press [OK].
{. “PAIRING” is indicated on the display.
3
Select “SC-NE3” from the Bluetooth ® device’s
Bluetooth ® menu.
4
Start play on the Bluetooth ® device.
≥ If prompted for the passkey, input “0000”.
≥ You can register up to 8 devices with this unit. If a 9th device
is paired, the device that has not been used for the longest
time will be replaced.
Preparation
≥ Turn on the Bluetooth
® feature of the device and
place the device near this unit.
≥ If this unit is already connected to a Bluetooth ®
device, disconnect it.
1
Press [ , AUX] to select “BLUETOOTH”.
{. “READY” is indicated on the display.
2
Select “SC-NE3” from the Bluetooth ® device’s
Bluetooth ® menu.
{. The name of the connected device is indicated on the
display for 2 seconds.
3
Start play on the Bluetooth ® device.
≥ This unit can only be connected to one device at a time.
≥ When “BLUETOOTH” is selected as the source, this unit will
automatically try and connect to the last connected
Bluetooth
® device.
≥ The Bluetooth ® device will be disconnected if “AUX” is
selected as an audio source.
You can change the transmission speed to prioritize
transmission quality or sound quality.
Preparation
≥ Press [ , AUX] to select “BLUETOOTH”.
≥ If a Bluetooth
® device is already connected,
disconnect it.
1
Press [PLAY MENU] repeatedly to select
“LINK MODE”.
2
Press [3, 4] to select the mode and then
press [OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
≥ The default setting is “MODE 1”.
If the sound input level of the Bluetooth ®
transmission is too low, change the input level
setting.
Preparation
≥ Connect a Bluetooth
® device.
1
Press [PLAY MENU] repeatedly to select
“INPUT LEVEL”.
2
Press [3, 4] to select the level and then press
[OK].
“LEVEL 0”
,. “LEVEL +1” ,. “LEVEL +2”
^----------------------------------------------------J
≥ Select “LEVEL 0” if the sound is distorted.
≥ The default setting is “LEVEL 0”.
1
While a Bluetooth ® device is connected:
Press [PLAY MENU] to select
“DISCONNECT?”.
2
Press [3, 4] to select “OK? YES” and then
press [OK].
Pairing Bluetooth
®
devices
Connecting a paired Bluetooth ®
device
Bluetooth
®
transmission mode
Bluetooth ® input level
Disconnecting a Bluetooth ®
device
SC-NE3_PPC~VQT4U49.book 12 ページ ２０１３年１月２８日 月曜日 午後４時２９分