Panasonic 36PEF1U6 - Manual (Page 133)

2-3
2. Processes and functions
Fig. 2
THERMO. ON THERMO. ON
+2 °F
F F O F F O
2
1. Refer to 2-4 Outdoor Fan Speed Control
OFF SET SPEED
N O N O N O
ON (REVERSING CYCLE)
ON
TEMP.
OPERATION
REMOTE CONTROL
SENSOR
(Only for wireless
remote controller)
BODY SENSOR
OFF
OFF
SET SPEED SET SPEED
3 SECONDS
ON OFF ON
MORE THAN
3 MINUTES
OFF ON OFF
ON OFF ON OFF OFF ON
3 MINUTES
MORE THAN
5 MINUTES 5 MINUTES
THERMO. ON
THERMO. ON THERMO. ON THERMO. ON
2. Refer to 2-2 Cold Draft Prevention (Heating)
BUTTON
COIL (4-WAY)
SOLENOID
E2
TEMP.
COIL
EXCH.
INDOOR HEAT
STANDBY
2
INDOOR FAN
1
OUTDOOR FAN
(H OR M)
COMPRESSOR
SET. +2 °F
SET. –2 °F
–2 °F
SET TEMP.+7 °F SHIFT
THERMO. OFF
THERMO. OFF
OFF
(88 °F)
81 °F
77 °F
1134_THS_I
THERMO. OFF THERMO. OFF
LL LL LL L L
SETTING TEMP.
SET TEMP.
Chart Summary and Explanations
Once the compressor starts, it keeps running for 5 minutes.
Once the compressor stops, it will not start running again for 3 minutes.
If you change the operation mode (HEAT, COOL or FAN) during the heating cycle, the
control circuit stops the compressor for 3 minutes.
For 5 minutes after the compressor is first turned on, and for 3 minutes after it is turned off,
the compressor is not controlled by the room sensor.
When set on remote control sensor
Thermo ON: When room temperature is –2˚F below the set temperature T˚.
Compressor ON
Thermo OFF: When the room temperature is 2˚F above the set temperature T˚, (T˚+2 ˚F)
Compressor OFF
When set on body sensor
NOTE: In case of Body sensor, operating temperature is shifted to setting temperature +7 ˚F.
(B) Heating
2
SM830203-01_PAC-i_US-letter.indb3 3 SM830203-01_PAC-i_US-letter.indb3 3 2012/01/26 14:25:04 2012/01/26 14:25:04