Panasonic TYST42PF3 - Manual (Page 3)

3
English
3
Notes regarding setting-up location
(usage location)
•
In order to ensure correct, problem-free operation of the Wide Plasma Display, do not
install the Display in any of the following places.
• Places which are next to sprinklers or sensors
• Places which are subject to vibration or shocks
• Places which are close to high-voltage wires or electric motors
• Places in direct contact with air from heaters
•
Insert the power cord plug for the Wide Plasma Display into a wall outlet which is close
and easily accessible.
•
Provide adequate ventilation so that the temperature around the display does not rise
above 40°C (104F°). If there is insufficient movement of the air inside display, heat may
build up inside the display, and fire may result.
Support .....................2 M8 bolt ...........................4
(for installing supports to stand
base)
Holder ..............................................1
Shelf.................................................1 M6 screw and spring
washer...................4 each
(for installing shelf and supports)
(for installing supports and
holder)
(for installing display)
Cable strap
.............................5
Stand base.......................................1 M5-15 screw .............4
M5-30 screw .............4
Components
ST42PF3E改-4-11/10最終 00.11.22 8:48 AM ページ 3