AOC CT700G User Manual
Page 4
5
OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
The other control knobs are located at the base of the monitor
(See Figure 3). By changing these settings, the picture can be
adjusted to your personal preferences.
The power cord should be connected.
Connect the video cable from the monitor to the video card.
To turn the monitor on, press the power switch to ON position.
The power indicator will light up.
Your monitor features a unique quick switch system which
provides a picture within seconds after the monitor is switched
on.
NOTES
Do not install the monitor in a location near heat sources such
as radiators or air ducts, or in a place subject to direct sunlight,
or excessive dust or mechanical vibration or shock.
Save the original shipping carton and packing materials, as they
will come in handy if you ever have to ship your monitor.
For maximum protection, repackage your monitor as it was
originally packed at the factory.
To keep the monitor looking new, periodically clean it with a soft
cloth. Stubborn stains may be removed with a cloth lightly
dampened with a mild detergent solution. Never use strong
solvents such as thinner, benzene, or abrasive cleaners, since
these will damage the cabinet. As a safety precaution, always
unplug the monitor before cleaning it.
Figure 1 Installing and Removing the Swivel Base
Figure 2 Connecting Cables
Figure 3 External Control Knob
1
2
3
1
2
3
4
5
6
7