Audiovox VE920E - Manual (Page 12)

54
13) P1 BUTTON – Selected Preset Channel “1” in the Radio or TV mode.
Previous button in DVD play mode.
14) VOLUME UP ( ) BUTTON
– Press this button to raise the volume.
15) VOLUME DOWN ( ) BUTTON – Press this button to lower the volume.
16) SEEK BUTTONS ( -Right Side) – Press these buttons to go to next availa-
ble channel with sufficient signal strength.
17) CHANNEL BUTTONS (
-Left Side) – Press these buttons to go to next
available channel.
18) DISPLAY WINDOW
– Displays the channel/station number, time, and selected
source.
19) REMOTE INFRARED SENSORS
– These sensors receive infrared command
signals from the hand held remote control unit.
20) Contrast Control
– Use this control to adjust the contrast
21) Color Control – Use this control to adjust the color
22) Brightness Control – Use this control to adjust the brightness
23) Screen Lock Button
REAR PANEL CONNECTIONS
1) AC LINE CORD – Connects to AC outlet
2) AUDIO LINE OUT – Connect to low-level input of stereo system or low-level input
of computer speaker
3) SPEAKER OUT TERMINAL
– Connect to external speakers (min. 8ohms)
4) FM ANTENNA – Allows the VE720E/VE920E to be connected to a 75-Ohm
external antenna for the reception of FM broadcast signals.
5) AM ANTENNA
– Allows the VE720E/VE920E to be connected to an external
antenna for the reception of AM broadcast signals.
6) A/V (AUDIO/VIDEO) INPUT CONNECTORS
– Connect to A/V OUTPUT of
a VCR or Camcorder.
7) TV ANTENNA (75 OHM ANTENNA CONNECTOR)
– Allows the
VE720E/VE920E to be connected to a 75-ohm external coaxial antenna or cable TV
system.