Panasonic SCHC39EC - Manual (Page 5)

5
RQT9944
EN
GL
IS
H
Connections
≥ These speakers do not have magnetic shielding. Do not place them near a TV, personal computer or other magnetic devices.
≥ Tape the antenna to a wall or column in a position with the least amount of interference.
≥ If radio reception is poor, use a FM outdoor antenna with a right angle type connector (not supplied).
1
Connect an external music device using an audio
cable (not supplied).
≥ Plug type: ‰3.5 mm stereo
2
Press [RADIO/AUX] to select “AUX” and start
playback on the connected device.
∫ To select the sound input level of the
external device
1 While in AUX mode, press [SOUND] repeatedly to
select “INPUT LEVEL”.
2 Press [3, 4] to select “NORMAL” or “HIGH” and
then press [OK].
≥ The factory default is “NORMAL”.
≥ To improve sound distortion when “HIGH” is selected, select “NORMAL”.
≥ Switch the equalizer off or turn the volume of the external device down to reduce the input signal. High level of input signal will
distort the sound.
≥ For details, refer to the operating instructions of the device.
Connect an external music device
2
1
Connect the AC mains lead after all other connections are completed.
This unit consumes a small amount of AC power (l 18) even when turned off.
≥ In the interest of energy conservation, if you will not be using this unit for an extended period of time,
unplug it from the mains socket.
Adhesive tape
(not supplied)
FM indoor antenna
(supplied)
To a mains socket
AC mains lead (supplied)
Connect the antenna.
Audio cable
(not supplied)
SC-HC39EC~RQT9944-R.book 5 ページ ２０１４年１月１７日 金曜日 午後３時５８分