beautypg.com

Testing the unit – AMX 16-Channel Custom Panel Interface AXP-CPI16 User Manual

Page 12

background image

8

AXP-CPI16 16-Channel Custom Panel Interface

Testing the Unit

If you have programmed the Axcess software, load the program into a PC connected to the control
system Master port. See Programming on page 4.

1.

Push switches connected to the AXP-CPI16.

2.

Look at the lower left of the Axcess screen to verify that the correct device and channel numbers are
displayed.

3.

Check for the appropriate feedback (as provided by the Master Controller program).