Removing the built-in rechargeable battery, Specifications – Panasonic ERGS60 User Manual
Page 16
16
English
Removing the built-in rechargeable battery
Remove the built-in rechargeable battery before disposing of
the clipper.
Please make sure that the battery is disposed of at an officially
designated location if there is one.
This figure must only be used when disposing of the clipper, and
must not be used to repair it. If you dismantle the clipper yourself,
it will no longer be waterproof, which may cause it to malfunction.
• Remove the clipper from the AC adaptor when removing the battery.
• Press the power switch to turn on the power and then keep the
power on until the battery is completely discharged.
• Perform steps 1 to 9 and lift the battery, and then remove it.
• Please take care not to short‑circuit the battery.
For environmental protection and recycling of materials
This clipper contains a Nickel‑Metal Hydride battery.
Please make sure that the battery is disposed of at an officially
assigned location, if there is one in your country.
Specifications
Power source
See the name plate on the AC adaptor.
Motor voltage
1.2 V
Charging time
RE7‑69
220 V
Approx. 10 hours
230 V
Approx. 8 hours
RE7‑74 for
the United
Kingdom
220 V
Approx. 12 hours
240 V
Approx. 8 hours
Airborne Acoustical
Noise
53 (dB (A) re 1 pW)
This product is intended for household use only.