Decimal positions, Controlling the iris (master value: iris), Using the menus – ARRI WRC-1 User Manual
Page 34

34
OFF
ON
IRIS
RAMP
SET/
SEL/
MODE
OPEN
RUN
CAM
WRC
READY
PHASE
,Iris
WRC-1
fps,
Iris
user
max
max
Iris
50%
Iris
off
Iris
fps
fps
ramp
ramp
ramp Iris
PROG
compen
sation
WRC
• Press the MODE button to change from the main menu
to a submenu. Each further press of the MODE button
takes the user to the next submenu, until the main
menu mode reappears.
• In a submenu press the SEL button for longer than 2
seconds to activate the edit mode, in which values can
be defined.
• The flashing digits can be edited using the handwheel.
• By pressing the SEL button the adjusted value is stored
and the next digits are activated. After the last digit
has been entered the edit mode is exited.
If only plain figures are to be adjusted, the decimal positions
can easily be set to ‘0’ by pressing the SET button. The
values for the next line can then be entered.
The submenus cannot be edited while the camera is running.
SEL button
SET button
handwheel
Using the menus