Audiovox DVD Home Theater System - Manual (Page 7)

E - 6
Rear Panel
1) Disc tray
Open or close tray by pushing OPEN/CLOSE button.
Place a disc on the disc tray, label side up.
2) standby indicator
When the Unit is turned on by pressing the POWER/
STANDBY button, the light will illuminate a few
seconds. If you press the POWER button on the
remote control, the Unit will turn off and go into
standby mode. The light will continue to illuminate.
3) 3 STEREO indicator
When 3 STEREO sound is selected in AV_IN mode,
the light will illuminate.
4) PRO LOGIC indicator
When DOLBY PRO LOGIC sound is selected in
AV_IN mode, the light will illuminate.
5) Display window
Display system information.
6) VOLUME control
Change the loudness of the sound from the speakers
connected to the Unit.
7) Remote sensor
Accept the remote control unit signals.
15) FM ANTENNA jacks
16) S-VIDEO (DVD) output jack
17) VIDEO OUT jack
18) AV IN (VIDEO/AUDIO) jacks
19) Right Front speaker terminals
20) Center speaker terminals
21) Left Front speaker terminals
22) AM LOOP ANTENNA terminal 23) DIGITAL AUDIO OUT jack
24) Left/Right AUDIO OUT jacks
25) VIDEO IN (VCR) jack
26) Right REAR speaker terminals
27) SUBWOOFER OUT jack
28) Left REAR speaker terminals
29) Power cord
Front Panel
8) FUNCTION button
Select the source.
9) STOP button
Stop playing a disc.
10) PAUSE button
Press to pause playback. Each time you press the
PAUSE button the picture advances one frame.
Press the PLAY button to resume playback.
11) PLAY button
Press to start or resume playback
12) SKIP buttons
Press SKIP button to go back to previous chapters/
tracks.
Press SKIP
button to advance to chapters / tracks.
Press and hold SKIP button to begin fast scan.
Four speeds are available.
Scan all available radio stations.
13) OPEN/CLOSE button
Use to open and close the disc tray.
14) POWER/STANDBY button
Turn the power on or off.
Parts and Functions
(Continued on next page) (Continued on next page) (Continued on next page) (Continued on next page) (Continued on next page)
Note:
Screen saver - If no button is pressed within 2 minutes, the screen save function will activate, If you want to return
to the normal screen, press any button.