Panasonic RRUS300E - Manual (Page 20)

VQT3T18
20
20
The following settings of the unit are common to both recording and playback.
Common settings operation
• When the unit is not in the stop state,
press [ STOP/RETURN].
1 Press [MENU/REPEAT MODE].
2
Press or to select the
setting item (“ ” or “ ”).
• The setting item that is blinking is
currently selected.
3 Press or to change the
setting.
• If you press or , the setting is
confirmed and you can set the next
setting item.
4 Press [ OK].
For “Setting the time”, see page 8.
BEEP (Beep sound)
Set the beep sound for during button
operation.
: No beep sound.
: Beep sound.
(The factory setting is “ ”.)
● Even if the beep sound is set to “ ”, the
operation beep sound is not output during
recording or while recording is paused.
LED (Recording indicator)
Set whether the recording indicator lights
during recording.
: Does not light.
: Lights.
(The factory setting is “ ”.)
● Even if “LED” is set to “ ”, the indicator
blinks during operations such as file
deletion.
Common settings