Panasonic RRUS300E User Manual
Page 12
VQT3T18
12
12
Change the microphone sensitivity in
accordance with the loudness of the sound
source. When the sound source is loud, set
the sensitivity to “ ” (LOW). When it is quiet,
set the sensitivity to “ ” (HIGH).
• When the unit is not in the stop state,
press [ STOP/RETURN].
1
Press [MENU/REPEAT MODE].
2
Press
or
to select “
”.
3
Press or to select “
” or
“
”.
: Sets the microphone sensitivity to the
high level.
: Sets the microphone sensitivity to the
low level.
(The factory setting is “ ”.)
4
Press [ OK] to confirm the
setting.
You can change the sound quality for
recording.
• When the unit is not in the stop state,
press [ STOP/RETURN].
1
Press [MENU/REPEAT MODE].
2
Press
or
to select “
”.
3
Press or to select “
” or
“
”.
: High sound quality mode
(128 kbps, monaural)
: Long recording mode
(32 kbps, monaural)
(The factory setting is “
”.)
4
Press [ OK] to confirm the
setting.
●
The length of time that recording is possible
changes depending on the sound quality.
(➜ page 33)
Changing the
microphone sensitivity
Changing the
sound quality