AMX AXB-MIDI - Manual (Page 5)

Product Information
1 AXB-MIDI MIDI Interface
Product Information
The AXB-MIDI MIDI Interface is an Axcess device for pass-through and control of Musical
Instrument Digital Interface (MIDI) protocol signals. This unit can act as a MIDI matrix switcher.
AXB-MIDI decodes and encodes MIDI protocol signals and routes the signals according to the
programming within an Axcess Central Controller. The AXB-MIDI communicates with the Central
Controller AXlink data protocols..
The AXB-MIDI provides MIDI signal pass-through and device control. Processing of MIDI
signaling is instantly visible via four front panel LEDs. A lithium battery provides data backup in
the event of power failure. The unit can be mounted in an electronic rack using an optional AC-RK
Accessory Rack Kit.
FIG. 1 AXB-MIDI - front and rear panel components
AXB-MIDI Specifications
Dimensions (HWD) 1.51" x 5.55" x 5.45" (3.84 cm x 14.10 cm x 13.84 cm)
Enclosure Metal with black matte finish
Power consumption 75 mA @ 12VDC
DIP Switch 8-position DIP switch sets the AXlink address for the AXB-MIDI.
Connectors • Four 5-pin DIN MIDI connectors (IN A, IN B, THRU and OUT).
• 4-pin captive wire connector for AXlink control signaling and power from the
Central Controller.
DEVICE AXlink
ON
A
IN
B
IN
OUT THRU
IN A THRU IN B OUT
AXlink
AX
P
GND AX
M
PW
R
AXlink Status LED
DEVICE DIP Switch
IN - MIDI B
IN - MIDI A
OUT LED
THRU LED
MIDI A INPUT
MIDI B INPUT
MIDI THRU
MIDI OUT
AXlink connector
Front
Rear