Panasonic CUL43DBE8 - Manual (Page 9)

9
Air Filter Maintenance
Cleaning is needed when: • lt is recommended to clean the air fi lter every 6
weeks.
• After the air fi lter is cleaned, press
FILTER RESET
/
FILTER RESET
to
reset.
• Do not operate without an air fi lter.
• Wash/rinse the air fi lter gently with water to avoid
damage to the air fi lter surface.
• Do not dry the part with a hair dryer or a stove.
• Replace any damaged air fi lter.
“FILTER RESET” appears on
the remote control display.
(For wired remote control)
“FILTER” lights up on the
indicator display.
(For wireless remote control)
1
2
1
2
ENGLISH
CARE & CLEANING CARE & CLEANING
• Switch off the power supply before cleaning.
• Do not touch the aluminium fi n, sharp parts may cause injury.
WASHING INSTRUCTIONS WASHING INSTRUCTIONS
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
HINTS HINTS
• Clean the fi lter regularly for best performance and to
reduce power consumption.
• Please consult your nearest dealer for seasonal
inspection.
CAUTION
22
Remove the main air fi lters from the intake grille tabs. Remove the main air fi lters from the intake grille tabs.
11
Push the knobs in the intake grille in the direction Push the knobs in the intake grille in the direction
of the arrow to open the intake grille. of the arrow to open the intake grille.
Remove Air Filter
Air Filter Installation
AUTO FAN
COOL DRY FILTER
RESET
AUTO
AUTO 123
FAN SPEED
AIR SWING
POWER
TIMER
FILTER
ECONOMY AUTO
ODOUR WASH
Knob Intake Grille
Push Push
33
Press the side air fi lter tab Press the side air fi lter tab
1
and and 2 in that order to release the side air fi lter. in that order to release the side air fi lter.
Knob
Push
Close
1. Install the air fi lters to the intake grille by the
reverse procedures of removal.
2. Close and push the knobs to secure the
intake grille.
AIR FILTERS
Vacuum, wash
and dry.
Main air fi lter
Side air fi lter
Push Push
Push Push
Tabs
INDOOR UNIT INDOOR UNIT
Wipe the unit gently with a
soft, dry cloth.