Apex Digital AD-703A - Manual (Page 22)

19 A P E X D I G I T A L AD-703A
1. Press the POWER button displayed on the front panel.
The POWER indicator will illuminate red, as the DVD video player turns on.
2. Press the OPEN/CLOSE button.
This will open the disc tray.
Be sure the playback side is faced down.
3. Place the disc on the disc tray.
4. Press ENTER/PLAY
After closing the disc tray playback
will start.
As the DVD video player is reading the disc, a menu
will appear on screen.
NOTICE
• Moving the DVD video player during playback may cause damage to the disc as well as the player.
• To open and close the disc tray, you may only use the OPEN/CLOSE button on the remote control or DVD video player.
• Do not force or place anything other than DVD video disc, VIDEO CD, audio CD on the disc tray.
Playing Back a Disc
HOW TO PLAYBACK A DISC.
Basic Playback ( see page 10 -13 for connections details)
How to playback DVD video discs or VIDEO CDs
• Turn on the TV and choose the video input source which is connected to the DVD video player.
How to enjoy the sound from the audio system
• Turn on the audio system and choose the input source which is connected to the DVD video player.
• Set the playback picture size respectedly to the ratio of the connected TV via the SETUP MENU displays.
• Set the "AUDIO OUTPUT" to "ANALOG" via the SETUP MENU displays, if you do not have the necessary
equipment to enjoy Dolby Digital (DTS) sound.
Notice
• A disc may be damaged if it is not correctly
placed on the guides in the disc tray, this
may also cause the DVD video player to
malfunction.
• Do not force or place anything other than
DVD video disc, VIDEO CD, audio CDs, or
MP3 CD on the disc tray.
Notice
• The menu screen will appear automatically
or you may access the menu screen by
pressing the TITLE button.
POWER