Menu items – Sony VPL-HS1 User Manual
Page 19

19
GB
Menu Configurations
Using
the M
e
n
u
s
Menu Items
Adjustable items are limited according to the input signals. Items that cannot be adjusted are not displayed in the
menu. (
Menu
Item
Description
PICTURE
CTRL
CONTRAST
The higher the setting, the greater the contrast. The lower the setting, the lower
the cotrast.
BRIGHT (brightness)
The higher the setting, the brighter the picture. The lower the setting, the darker
the picture.
COLOR
The higher the setting, the greater the intensity. The lower the setting, the lower
the intensity.
HUE
The higher the setting, the more greenish the picture becomes. The lower the
setting, the more purplish the picture becomes.
SHARP (sharpness)
The higher the setting, the sharper the picture. The lower the setting, the softer
the picture.
RGB ENHANCER
Adjusts the picture sharpness when computer signals are input.
D. (Dynamic)
PICTURE
ON:
Emphasizes the black color.
OFF:
Reproduces the dark portions of the picture accurately, in accordance
with the source signal.
GAMMA MODE
GRAPHICS:
Reproduces the photos in natural tones.
TEXT:
Contrasts black and white. Suitable for images that contain lots of text.
COLOR TEMP
HIGH:
Gives the white colors a blue tint.
MIDDLE:
Gives the white colors a neutral tint.
LOW:
Gives the white colors a red tint.
COLOR SYS (System) Select the color system of the input signal.
AUTO:
NTSC
3.58
, PAL, SECAM and NTSC
4..43
(switched automatically).
Normally, set to this position.
PAL-M/N:
PAL-M/PAL-N and NTSC
3.58
(switched automatically).
When the PAL-M, PAL-N or NTSC
3.58
signal is input with COLOR SYS
set to AUTO, set to this position if the picture is distorted or colorless.
VOLUME
Adjusts the volume. It can be adjusted for each of the inputs selected with the
INPUT button.
INPUT
SETTING
DOT PHASE
When a signal from a computer is input, adjusts the picture for clearer picture
after the picture is adjusted by pressing the APA button.
SIZE H
When a signal from a computer is input, adjusts the horizontal size of the
picture. The higher the setting, the wider the picture. The lower the setting, the
narrower the picture.
SHIFT
As the setting for
H
(horizontal) increases, the picture moves to the right, and as
the setting decreases, the picture moves to the left. Use
< or , to adjust the
horizontal position.
As the setting for
V
(vertical) increases, the picture moves up, and as the setting
decreases, the picture moves down. Use
M or m to adjust the vertical position.
SCAN CONV (Scan
converter)
ON:
Displays a computer signal according to the screen size. The picture will
be slightly softer.
OFF:
Displays a computer signal as it is input. The picture will be clear but the
picture size will be smaller.
Note
When SVGA or XGA signal is input, this item will not be displayed.
ASPECT
4:3:
Select when the 4:3 aspect ratio picture is input.
16:9:
Select when the 16:9 aspect ratio picture (sqeezed) is input from
equipment such as a DVD player.