Adder Technology AdderView CATx EPS-S8 - Manual (Page 67)















If you need to enter a port number
Usually,.when.you.make.a.network.connection.to.the.AdderView.CATx.IP.(either.
using.the.VNC.viewer.or.a.Web.browser).you.simply.enter.the.IP.address,.i.e..
192.168.0.3..However,.if.a.special.configuration.is.necessary,.then.you.may.be.
asked.to.specify.a.port.number.as.well.as.the.IP.address.
What is a port?
To enter a port number in a Web browser
1. Enter.the.required.IP.address.in.the.usual.Address.box,..
i.e..http://192.168.0.3
2. At.the.end.of.the.IP.address,.add.a.single.colon.( :).and.then.enter.the.port.
number.(in.this.example,.the.required.port.number.is.8000),.
i.e..http://192.168.0.3:8000
3. Continue.with.the.standard. Web browser instructions ..
To enter a port number in VNC viewer
1. Enter.the.required.IP.address.in.the.usual.‘Server’.box,..
i.e..http://192.168.0.3
2. At.the.end.of.the.IP.address,.add.two.colons.( ::).and.then.enter.the.port.
number.(in.this.example,.the.required.port.number.is.8000),.
i.e..http://192.168.0.3::8000
3. Continue.with.the.standard. VNC viewer instructions .
Access via dial up (modem or ISDN) link
When.you.gain.access.via.modem.or.ISDN.link,.the.AdderView.CATx.IP.uses.
standard.network.protocols.to.create.a.private.two-device.network..This.
approach.ensures.consistency.and.allows.you.to.use.exactly.the.same.VNC.
viewer.or.browser.to.view.the.host.computers..This.is.achieved.using.PPP.(Point.
to.Point.Protocol).and.means.that.you.need.to.use.a.dial-up.networking.method.
to.initiate.the.connection..Such.software.is.standard.with.operating.systems.
such.as.Windows,.Linux.and.Mac.OS.
To initiate a dial up link
1. Using.a.system.that.has.a.modem.or.ISDN.adapter.installed,.locate.the.
dial-up.networking.option.on.your.system..Please.refer.to.your.system.
documentation.for.more.information...
2. Using.the.dial-up.networking.option,.enter.the.telephone/ISDN.number.
where.the.AdderView.CATx.IP.can.be.contacted.
3. Initiate.the.call.and.when.the.link.is.made,.continue.with.either.the.standard.
VNC viewer .or. browser connection ..
Note: For the viewer network connection address, you must use the IP
address that the admin user has set as the Server address (or PPP server IP
address) within the Modem configuration screen.