Adder Technology AdderView CATx EPS-S8 - Manual (Page 26)















Configuration menus layout
The.menu.options.are.arranged.as.shown.here:
For.a.description.of.each.option.within.the.Configuration.menus,.see..
Appendix 1 .for.more.details.
Configuration Menu Functions
(F1) Advanced Options
User Preferences
Routing status
Global Preferences
Setup Options
Edit Computer List
Edit User List
Edit Autoscan List
Restore Standard Mouse
Restore Intellimouse
Power Control
Clear UTP Extender Password
Reset to Factory Defaults
Send Data to RS232 port
Read Data from RS232 port
Configure IP port
DDC Options
Power Control
USB Country Code
Setup Options 2 Force Mode
OSD Colour
Reminder Banner
Reminder Colour
Screen Saver Type
Confirmation Box
Unit Configuration
Network Configuration
Modem Configuration
Reset Configuration
Mouse Switching
Screen Saver
Autoscan Mode
Autoscan Period
OSD Dwell Time
User Timeout
RS232 Mouse Type
Mouse Type
Security
Language
Hotkeys
Keypad Controls
Exclusive Use
Automatic Logout
Audio
Add Computers
AdderView CATx IP only
General security and configuration steps
To enable general security
1. Display.the. Configuration menu .
2. Highlight.‘Setup.Options’.and.press. .
3. Highlight.‘Security’.and.press. .to.select.‘ENABLED’.
4. Now.create.a.new.password.for.the.ADMIN.user.account.
To set an ADMIN password
1. Display.the. Configuration menu .
2. Highlight.‘Edit.User.List’.and.press. .
3. Highlight.‘ADMIN’.and.press. ..Press. .again.to.accept.the.
name.‘ADMIN’.without.change.
4. Enter.an.appropriate.password.for.the.ADMIN.user.account.
with.regard.to.the.following:.
•. The.password.can.be.up.to.12.characters.long..
•. The.password.can.use.letters,.numerals.and/or.certain.
punctuation.marks..
•. The.password.is.not.case.sensitive.
5. Press. ..The.‘Edit.Access.Rights’.menu.will.be.displayed..
However,.as.the.ADMIN.account.always.has.access.to.all.
computers,.press.
.again.to.save.the.new.password.
What to do if the ADMIN password has been forgotten .
To change the hotkeys
AdderView.CATx.units.use
and. as.their.standard.hotkeys..
These.can.be.changed.if.they.clash.with.other.software.or.
hardware.within.the.installation..
1. Display.the. Configuration menu .
2. Highlight.‘Setup.Options’.and.press. .
3. Highlight.‘Hotkeys’.and.press. .to.select.the.required.
hotkey.combination..The.options.are:.CRTL+ALT, CTRL+SHIFT,
ALT+SHIFT, ALT GR, LEFT ALT+RIGHT ALT, LEFT CTRL+LEFT ALT,
RIGHT CTRL+RIGHT ALT or DISABLED.
4 Press. .to.return.to.the.‘Configuration.Menu’.