Adder Technology AdderView CATx EPS-S8 - Manual (Page 71)















0
Functions
The.Functions.menu.contains.a.collection.
of.procedures.that.affect.various.aspects.of.
AdderView.CATx.operation..Only.the.Admin.
user.is.granted.access.to.all.functions,.other.
users.are.offered.only.the.following.options:
•. Restore Standard Mouse,.
•. Restore Intellimouse,
•. Power control.-.only.computers.to.which.
a.user.has.access.rights.can.be.switched...
Power Control
The.options.within.this.section.are.usable.only.when.the.AdderView.CATx.is.
used.in.conjunction.with.one.or.more.external.power.switch.units..For.more.
details.see:.power.switching.
connections ,. configuration ,. operation (via
menu) .or. operation (via viewer)
Switch Computer ON
Select.this.option.to.power.on.one.or.more.computers.
Switch Computer OFF
Select.this.option.to.power.off.one.or.more.computers.
Edit Power ON String
Select.this.option.to.alter.the.special.codes.that.are.sent.from.the.AdderView.
CATx.to.the.connected.power.switch(es).in.order.to.switch.computers.on.
Edit Power OFF String
Select.this.option.to.alter.the.special.codes.that.are.sent.from.the.AdderView.
CATx.to.the.connected.power.switch(es).in.order.to.switch.computers.off.
Send Data to RS port
This.option.is.used.to.save.AdderView.CATx.configuration.information.to.
a.specially.connected.computer..A.temporary.link.must.be.made.using.the.
COM1/UPGRADE .port.at.the.rear.of.the.AdderView.CATx.and.the.computer.must.
run.a.custom.routine.available.from.Adder.Technology.Limited..The.resulting.
download.file.can.be.optionally.edited.(using.a.text.editor.or.spreadsheet).and/
or.reloaded.into.the.AdderView.CATx..This.option.is.especially.useful.in.complex.
cascade.arrangements.where.many.computers.are.attached..See.
Saving and
restoring configuration settings .for.more.details......
Read Data from RS port
This.option.is.used.to.reload.configuration.information.into.the.AdderView.CATx.
from.a.specially.connected.computer..See.above.for.more.details.
Configure IP port
AdderView.CATx.IP.models.only..Displays.a.sub.menu.containing.options.related.
specifically.to.IP.network.and.modem/ISDN.port.features..See.
Configure IP port .
for.details.
ADDERVIEW CATx IP
Functions
Restore Standard Mouse
Restore Intellimouse
Power Control
Clear UTP Extender Password
Reset to Factory Defaults
Send Data to RS232 port
Read Data from RS232 port
Configure IP port
Enter-Run Function
-Up -Down Esc-Quit To get here
1. From.a.local,.remote.or.global.keyboard,.
log.on.as.a.standard.(limited.options).or.
‘admin’.user.
2. Press. . . .(hotkeys.can.change).
3. Press. .to.select.‘More.menus’.
4. Select.‘Functions’..
Restore Standard Mouse
This.option.is.used.to.resume.standard.mouse.operation.if.it.has.ceased.to.
operate,.for.instance,.if.it.has.been.connected.without.rebooting.the.AdderView.
CATx..See.
Hot plugging and mouse restoration .for.more.details.
Restore Intellimouse
This.option.is.used.to.resume.Microsoft.Intellimouse.operation.if.it.has.ceased.to.
operate,.for.instance,.if.it.has.been.connected.without.rebooting.the.AdderView.
CATx..See.
Hot plugging and mouse restoration .for.more.details.
Clear UTP Extender Password
Available.only.at.the.local.console.connection,.this.option.places.any.X100.or.
X200.extender.that.is.locked.in.password.mode.into.configuration.mode..The.
extended.user.can.then.clear.or.re-enter.the.password,.as.required.
Reset to Factory Defaults
Returns.all.key.settings.within.the.AdderView.CATx.to.their.original.states..
WARNING: This function will clear all computer and user lists that are stored
within the AdderView CATx.
When.this.option.is.selected,.you.must.press. .to.confirm.the.action..The.internal.
data.will.be.rewritten.and.a.completion.message.displayed.after.a.short.period.