Adder Technology AdderView CATx EPS-S8 - Manual (Page 12)















Global user (IP network port)
The.AdderView.CATx.IP.models.
provide.an.autosensing.Ethernet.
IP.port.that.can.operate.at.10.or.
100Mbps,.according.to.the.network.
speed..The.AdderView.CATx.IP.
models.are.designed.to.reside.quite.
easily.at.any.part.of.your.network:.
•. They.can.be.placed.within.
the.local.network,.behind.any.
firewall/router.connections.to.the.Internet,.or
•. They.can.be.placed.externally.to.the.local.network,.on.a.separate.sub-
network.or.with.an.open.Internet.connection....
Wherever.in.the.network.an.AdderView.CATx.IP.is.situated,.you.will.need.to.
determine.certain.configuration.issues.such.as.address.allocation.and/or.firewall.
adjustment.to.allow.correct.operation..Please.refer.to.
Networking issues .within.
the.Configuration.chapter.for.more.details..
IMPORTANT: When an AdderView CATx IP is accessible from the public Internet
or dial up connection, you must ensure that sufficient
security measures are
employed.
IP network link
To connect the Global user (IP network) port
1. Depending.upon.where.in.the.network.the.AdderView.CATx.IP.is.being.
connected,.run.a.category.5,.5e.or.6.link.cable.from.the.appropriate.hub.or.
router.to.the.AdderView.CATx.IP.unit.
2. Connect.the.plug.of.the.link.cable.into.the.IP.port.on.the.front.panel.of.the.
AdderView.CATx.IP.unit.
3. Configure.the.network.settings.as.appropriate.to.the.position.of.the.
AdderView.CATx.IP.within.the.network.-.see. Networking issues .for.details..