Sony PCV-MXS10 - Manual (Page 78)

VAIO MX Computer User Guide
78
and Maintaining Your VAIO® MX Computer,” Failure to do so may result
in personal injury or equipment damage.
❑
Electrostatic discharge (ESD) can damage disk drives, add-on cards, and
other components. Follow the procedures described in the online manual,
“Upgrading and Maintaining Your VAIO® MX Computer,” only at an ESD
workstation. If such a station is not available, do not work in a carpeted area,
and do not handle materials that produce or hold static electricity (for
example, cellophane wrappers). Ground yourself by maintaining continuous
contact with an unpainted metal portion of the chassis while performing the
procedure.
❑
When removing a slot cover, be careful not to damage components on the
system board or add-on cards. You may need to temporarily remove add-on
cards that are next to the slot cover you want to remove.
Handling a CRT display
❑ Do not change the CRT display refresh rate to 85 Hz, as DVD playback and
the DVgate software may not function correctly. Sony recommends that you
keep your CRT display at the preset, optimal refresh rate (75 Hz).
❑ Do not place the display near a strong magnetic force.
❑ Do not block the ventilation slots on the display.
❑ Using the computer in low temperature conditions may produce a residual
image on the screen. This is not a malfunction. When the computer returns to
normal temperature, the screen returns to normal.
❑ A residual image may appear on the screen if the same image is displayed
for a lengthy period of time. The image disappears after a period of time.
You can use a screen saver to prevent residual images.
❑ The screen becomes warm during operation. This is normal and does not
indicate a malfunction.
Handling an LCD display
❑ Do not leave the display directly facing the sun for a long period of time as it
can damage the LCD screen.
❑ Do not scratch the LCD screen or exert pressure on it. This may cause
damage to the screen or cause a malfunction.