Sony PEG-T665C - Manual (Page 114)

Chapter 3 Exchanging and updating data using a HotSync ® operation
114
Advanced HotSync ® operations
Preparing your computer
The following few steps must be performed to prepare your computer for a
modem HotSync operation. Be sure to perform these steps before you leave
your office or home so that your computer is ready to receive a call from
your CLIÉ handheld.
1
Verify the following, to prepare your computer for a modem
HotSync operation:
• The computer modem is connected to your computer and both the
modem and computer are turned on.
• No communication applications, such as fax or telephony software,
are running on the COM port.
• The computer is disconnected from all online services. This helps to
avoid conflicts with the COM port.
2
Click the HotSync icon in the Windows task tray (bottom-
right corner of the taskbar) and select Modem from the
shortcut menu.
3
Click the HotSync icon in the Windows task tray again
and select Setup from the shortcut menu.
The Setup dialog box is displayed.
4
Click the Modem tab.
Continued on next page