Sony STR-DH700 - Manual (Page 44)

44 US
a)
For details, refer to the page in the parentheses.
b)
You can only select this parameter when the surround back speakers are set to “SINGLE”.
c)
You can only select this parameter when the surround back speakers are set to “DUAL”.
d)
This parameter is only available if the SiriusConnect Home tuner is connected to the SIRIUS jack on the
receiver.
e)
“AUDIO FOR HDMI” and “CONTROL FOR HDMI” scroll across the display, then “AUDIO” and
“CONTROL” appear respectively.
f)
You can only select this parameter when the surround back speakers are set to “NO”.
g)
This parameter is only available if the S-AIR transmitter (not supplied) is inserted to the EZW-T100 slot on
the receiver.
Menu
[Display]
Parameters
[Display]
Settings Initial
setting
S-AIR
[9- S-AIR]
(page 56)
S-AIR ID
g)
[ID SETUP]
ID A, ID B, ID C ID A
Pairing
g)
[PAIRING]
START, STATUS
S-AIR Mode
g)
[MODE]
PARTY, SEPARATE PARTY
RF Change
g)
[RF SETUP]
RF AUTO, RF ON, RF OFF RF AUTO
S-AIR Standby
g)
[STANDBY]
STBY ON, STBY OFF STBY OFF