Sony DVP-NS400D - Manual (Page 32)

32
Resuming Playback from
the Point Where You
Stopped the Disc
(Resume Play)
When you stop the disc, the player
remembers the point where you pressed x
and “RESUME” appears on the front panel
display. As long as you do not open the disc
tray, Resume Play works even if the player
enters standby mode by pressing
[ /1 .
1
While playing a disc, press x to
stop playback.
“RESUME” appears on the front panel
display and you can restart the disc
from the point where you stopped the
disc.
If “RESUME” does not appear,
Resume Play is not available.
2
Press H.
The player starts playback from the
point where you stopped the disc in
Step 1.
z To play from the beginning of the disc, press x
twice, then press H.
Notes
•
Depending on where you stopped the disc, the player
may not resume playback from exactly the same
point.
•
The point where you stopped playing is cleared
when:
— you turn the power off by pressing POWER on
the player.
— you change the play mode.
— you change the settings on the Setup Display.
x H