Sony PCG-V505AXP - Manual (Page 112)

Connecting a projector
You can use a projector to display the actions and images on the computer screen (LCD).
To connect a projector
1. Plug the projector into an AC outlet.
2. Plug the display cable into the Monitor (VGA) port on your computer.
To locate the Monitor port, see "Locating Controls and Ports" in the "Setting Up" chapter of your printed VAIO ®
Computer Quick Start.
Connecting a Projector
3. Turn on the projector (if it is not already on), and then turn on your computer.
4. Press the Fn+F7 key combination to toggle the display between your computer and the projector. See Selecting
a display for more information.
See the guide that accompanied your projector for more information on its installation and use.
Page 112