Iii. installation – Asus II/CELERON P2V User Manual
Page 15
ASUS P2V User’s Manual
15
NOTES
•
Overclocking your processor is not recommended. It may result in a slower
speed. Voltage Regulator Output Selection (VID) is not needed for the Pentium
III / II / Celeron processors because they send VID signals directly to the onboard
power controller.
•
For updated processor settings, visit the ASUS web site (see ASUS CONTACT
INFORMATION for URLs).
(BUS Freq.)
(Freq. Mult.)
Intel CPU Model
Freq.
Mult. BUS F.
FS0 FS1 FS2 FS3
BF0 BF1 BF2 BF3
Pentium III
550MHz 5.5x 100MHz [1-2] [1-2] [1-2] [2-3]
[1-2] [1-2] [1-2] [2-3]
Pentium III
500MHz 5.0x 100MHz [1-2] [1-2] [1-2] [2-3]
[2-3] [1-2] [1-2] [2-3]
Pentium III / II
450MHz 4.5x 100MHz [1-2] [1-2] [1-2] [2-3]
[1-2] [2-3] [1-2] [2-3]
Pentium II
400MHz 4.0x 100MHz [1-2] [1-2] [1-2] [2-3]
[2-3] [2-3] [1-2] [2-3]
Pentium II
350MHz 3.5x 100MHz [1-2] [1-2] [1-2] [2-3]
[1-2] [1-2] [2-3] [2-3]
Celeron
466MHz 7.0x
66MHz
[1-2] [1-2] [2-3] [2-3]
[2-3] [1-2] [2-3] [1-2]
Celeron
433MHz 6.5x
66MHz
[1-2] [1-2] [2-3] [2-3]
[1-2] [2-3] [2-3] [1-2]
Celeron
400MHz 6.0x
66MHz
[1-2] [1-2] [2-3] [2-3]
[2-3] [2-3] [2-3] [1-2]
Celeron
366MHz 5.5x
66MHz
[1-2] [1-2] [2-3] [2-3]
[1-2] [1-2] [1-2] [2-3]
Pentium II/Celeron 333MHz 5.0x
66MHz
[1-2] [1-2] [2-3] [2-3]
[2-3] [1-2] [1-2] [2-3]
Pentium II/Celeron 300MHz 4.5x
66MHz
[1-2] [1-2] [2-3] [2-3]
[1-2] [2-3] [1-2] [2-3]
Pentium II/Celeron 266MHz 4.0x
66MHz
[1-2] [1-2] [2-3] [2-3]
[2-3] [2-3] [1-2] [2-3]
Pentium II
233MHz 3.5x
66MHz
[1-2] [1-2] [2-3] [2-3]
[1-2] [1-2] [2-3] [2-3]
Set the jumpers by the Internal speed of your processor as follows:
III. INST
ALLA
TION
Jumpers
III. INSTALLATION