Sony VPL-VW50 - Manual (Page 36)

36
Tip
There are some limitations on selection of position and range.
2 Press M / m to select “Position” or
“Range,” and specify it more
delicate color and color range you
want to adjust using
< / , .
4
Adjust the color of the specified
portions.
Press
M / m to select “RCP Color” or
“RCP Hue,” then adjust the color or
hue of the portions selected in step 3 to
suit your taste using
< / , while
watching the projected picture. The
picture is returned to normal color
during adjustment.
5
After the adjustment is
complete, press ENTER.
The RCP window disappears and the
picture of step 2 is appeared. Then
after a few seconds, normal picture is
restored.
The adjusted data will be stored in a
memory selected in step 2 and will be
recalled later.